24 unit FAST charger rack

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry.

Crew Transport buses for long term charter in locations around the world where reliable transportation is critical. Getting the crew to and from the job site in safety and comfort is key to a good start and end to the workday. Custom crew bus solutions available and every project is unique so please contact us to work together to find an optimum solution on crew transport.

Introducing the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools: Revolutionizing Well Intervention and Completion Operations Marlin Oil Tools is proud to present the HVT (Hydraulic Vibration Tool), an advanced downhole tool designed to significantly enhance the efficiency and reach of well intervention and completion operations. The HVT stands out for its ability to create controlled vibrations when liquid is pumped through it, reducing the friction coefficient across the Bottom Hole Assembly (BHA) and ensuring extended reach in long horizontal wells. Here’s a closer look at the HVT’s features, benefits, and why it’s an essential tool for your oil and gas operations. Key Features of the HVT (Hydraulic Vibration Tool): Friction Reduction: The HVT generates vibrations that significantly reduce the friction coefficient, facilitating smoother and longer reach of the BHA in horizontal wells. Versatile Application: With options for larger diameters, the HVT can also be utilized as part of the casing shoe, ensuring that the casing reaches the planned depth during well completions. Exceptional Durability: Engineered to withstand harsh downhole conditions, the HVT is resistant to nitrogen, acid, and hydrogen sulfide, offering unlimited working time in challenging environments. Compact and Efficient: The tool’s short length makes it an ideal choice for operations requiring high maneuverability and efficiency. Elevate your well intervention and completion processes with the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools, a cutting-edge solution designed to overcome the challenges of extended reach in horizontal wells. By creating controlled vibrations, the HVT reduces friction, enhancing BHA maneuverability and ensuring casing is accurately placed during well completions. Its resistance to nitrogen, acid, and hydrogen sulfide guarantees reliability in even the most demanding environments, while its compact design promotes operational efficiency. Choose the HVT for unparalleled performance and durability in your oil and gas operations. Why Choose the HVT from Marlin Oil Tools? Enhanced Operational Reach: Maximizes the effectiveness of well interventions in horizontal sections. Increased Completion Success: Assists in achieving accurate casing placement for optimal well completions. Reliable in Harsh Conditions: Offers unmatched durability against nitrogen, acid, and hydrogen sulfide. Streamlined Design: Facilitates ease of use and integration into existing operations without extensive modifications. The HVT (Hydraulic Vibration Tool) by Marlin Oil Tools represents the forefront of innovation in downhole tool technology, providing operators with a powerful solution to enhance the reach and success of well interventions and completions. Incorporate the HVT into your toolkit to achieve operational excellence and maximize the potential of your oil and gas wells.

Elevate Power Management with DAKAR: The Future of Energy Efficiency At ELEKS, we're committed to revolutionizing the energy industry with innovative software solutions that empower businesses to thrive in the digital age. Introducing DAKAR, our cutting-edge power management system designed to enhance operational efficiency, minimize errors, and transform the way energy is managed. DAKAR has become the preferred choice for numerous European energy producers, distributors, utilities providers, design organizations, and educational institutions, and for good reason. Unleash the Power of DAKAR Seamless Integration: DAKAR seamlessly integrates into any power industry organization, ensuring a smooth transition to advanced power management solutions without disrupting your existing workflows. Comprehensive Capabilities: Experience extensive capabilities for utilities network management, modeling, and planning. DAKAR empowers you to optimize your power networks, ensuring they operate at peak efficiency while adapting to both traditional and renewable energy sources. Enhanced Accuracy and Reliability: With DAKAR by your side, you can elevate the accuracy and reliability of your power systems. Our software empowers you to make informed decisions based on real-time data, leading to reduced errors and improved performance. Real Results, Real Numbers Impressive Customer Base: With a track record of success, DAKAR is trusted by 250 customers across diverse industries. From energy suppliers to educational institutions, businesses worldwide rely on DAKAR for streamlined power management. Leading Ukrainian Energy Suppliers: In Ukraine, where the energy landscape is evolving rapidly, DAKAR stands out as the software of choice for 2/3 of energy suppliers. Its impact on efficiency and productivity is undeniable. 40% Productivity Growth: Businesses using DAKAR have experienced a remarkable 40% growth in productivity. This tangible result speaks volumes about the transformative power of our software in enhancing operational efficiency. ELEKS: Pioneering Energy Innovation For over three decades, ELEKS has been at the forefront of technology and innovation, creating solutions that drive industries forward. DAKAR embodies our commitment to shaping the energy industry for the better, providing unparalleled tools to manage power systems with accuracy and precision. Experience the Future of Power Management Embrace the future of power management with DAKAR by ELEKS. Join the ranks of satisfied customers who have unlocked efficiency, minimized errors, and achieved remarkable growth. Elevate your operational efficiency and take control of your energy systems like never before. With DAKAR, the future is bright, sustainable, and powered by cutting-edge technology.

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Unleash Innovation and Elevate Your Business with ELEKS' Custom Application Development Services In today's dynamic business landscape, having a cutting-edge software solution that caters to your unique needs is no longer a luxury – it's a strategic necessity. ELEKS, a leader in the software engineering industry, offers a comprehensive suite of custom application development services that empower you to bring your boldest software visions to life. Our end-to-end approach ensures that your business stays ahead of the curve, delivering an exceptional user experience that sets you apart from the competition. Transforming Visions into Reality: How We Can Help You At ELEKS, we understand that every software vision is unique. Our custom application development service is designed to assist you in every step of your journey, from idea inception to implementation. Here's how we'll make a difference for you: 1. Validating Your Vision We kick-start your application development process with product design workshops that help shape your concepts and validate your ideas through data-led product design. Our Proof of Concept (PoC) development enables you to explore and invest in ideas that hold real business value, ensuring that your efforts are directed towards solutions with a high potential for success. 2. Innovating and Competing Innovation is at the heart of what we do. Our dedicated Research and Development (R&D) team is adept at crafting strategic solutions for even the most complex custom application development projects. Leveraging innovative technologies, we ensure that your products are tailor-made for rapidly evolving markets, giving you a competitive edge. 3. Maximizing Efficiency Automation is the key to releasing resources for delivering superior service. Once we've defined your application development requirements, we take full responsibility for the delivery team and project implementation. This allows you to concentrate on your core business activities while we handle the technical intricacies. 4. Accelerating Delivery Meeting demanding deadlines is crucial. Our nearshore team of software experts is here to assist you in cost-effectively achieving your goals, surpassing what in-house development alone can offer. With decades of experience and a proven delivery framework, we ensure consistency and minimize bottlenecks, enabling faster project delivery. 5. Ensuring Future-Proofing Future-proofing is paramount in the tech world. We establish a continuous integration/delivery process that lets you seamlessly check and deliver code changes across multiple platforms. This approach not only enhances your software ecosystem but also allows you to provide an exceptional service to your customers. 6. Ensuring Operational Resilience and Agility Incorporating Cloud, AI, and RPA technologies, we help you build digitally resilient ecosystems. These ecosystems allow you to adapt swiftly to market changes, fostering business growth. Our rigorous business analysis ensures a tailored, cost-effective technology solution that supports your business needs and continuity plans. Unveiling Our Services: Transforming Concepts into Reality ELEKS offers a range of comprehensive application development services to cater to all your needs: Desktop Software Our full-cycle application development includes seamless desktop app integration for various operating systems, ensuring a smooth experience for users of Windows, macOS, and Linux. Web Applications From technology consulting and UX design to front and back-end development, deployment, and support, our web application development service covers every aspect of creating successful web solutions. Custom Mobile Apps Our mobile application development services provide end-to-end solutions for iOS and Android platforms, delivering flawless performance, robust security, and an enhanced user experience. Data Warehouse and BI Solutions We specialize in delivering advanced Data Warehouse and Business Intelligence solutions across different domains, unlocking actionable insights and driving operational efficiency. Our Workflow: Making Your Vision a Reality Our application development process involves key steps that ensure the success of your project: 1. Idea Validation: We collaborate with you to outline your requirements, identifying ideas that hold the most potential for long-term success. 2. Innovation and Development: Our expert development team designs a custom solution utilizing emerging technologies to address gaps in your current IT ecosystem. 3. Software Testing: We ensure your custom app meets both functional requirements and quality standards, performing user acceptance testing and providing support with technical documentation. 4. Project Governance: Our governance covers product deployment, progress reporting, and issue resolution, keeping you informed and your project on track. When you partner with ELEKS, you're partnering with a Top 100 Global Outsourcing development company that places your project in capable hands. Unlock Your Potential with ELEKS ELEKS' custom application development services are more than just solutions – they are opportunities to innovate, compete, and thrive in the digital age. With a dedicated team of over 2000 software experts and a proven track record of success, we're ready to transform your ideas into reality. Contact us today to embark on a journey of innovation, efficiency, and growth with ELEKS as your trusted partner.

Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity.

Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions.

Advance Your Manufacturing with Laser Cutting Tool Leasing from CWB National Leasing Elevating Precision and Efficiency in Your Operations with Strategic Leasing Solutions For businesses in manufacturing, engineering, or design, laser cutting tools are indispensable for precision cutting and fabrication. Leasing laser cutting tools through Canadian Western Bank (CWB) National Leasing offers a flexible, financially savvy solution for businesses aiming to enhance their manufacturing capabilities. Here’s how leasing laser cutting tools can revolutionize your operational processes: 1. Rapid Equipment Access CWB National Leasing values the pace of your business operations and offers a quick leasing process. Decisions are typically made within 48 hours of your application, ensuring fast notification to your equipment dealer. This efficiency means your laser cutting tools can be delivered and operational quickly, minimizing downtime and boosting productivity. 2. Enhanced Financial Flexibility Leasing laser cutting tools with CWB National Leasing increases your buying power. Opting for periodic payments over a large upfront purchase helps free up capital for other critical aspects of your business. Furthermore, the option to add extra features or accessories to your laser cutting tools for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management With manageable lease payments spread over the term, your laser cutting tools begin contributing to your business’s revenue while still being paid off. This balanced financial strategy is key in maintaining a healthy expense-to-revenue ratio, essential for business growth and sustainability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing laser cutting tools can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease laser cutting tools through CWB National Leasing is a strategic decision that empowers your business with advanced manufacturing equipment while maintaining financial agility. It ensures access to state-of-the-art laser cutting technology, vital for precision and efficiency in production, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased production capacity, and greater profitability, helping your business to excel in the competitive manufacturing industry.

Introducing the MDT Mechanical Dimple Tool from Marlin Oil Tools: Your Essential Companion for Coil Tubing Connector Installation Marlin Oil Tools is proud to present the MDT Mechanical Dimple Tool, a specialized hand tool designed to significantly simplify the process of attaching dimple connectors to the end of coil tubing. This tool is an indispensable asset for oil and gas field operations, ensuring a secure and efficient setup of coil tubing connectors, even when dealing with connectors that have a larger diameter than the coil tubing itself. Key Features of the MDT Mechanical Dimple Tool: Reliable and Robust Design: Engineered for durability and reliability, the MDT Mechanical Dimple Tool is built to withstand the demanding conditions of oil and gas operations. Versatile Connector Compatibility: Thanks to its innovative two-half construction, the MDT allows for the mounting of dimple connectors of various sizes, providing unparalleled flexibility in connector installation. Ease of Use: Designed as a hand tool, the MDT Mechanical Dimple Tool is user-friendly and requires no specialized training for operation, making it ideal for quick and efficient use in the field. Adaptable to Coil Tubing Variations: Capable of accommodating connectors with diameters larger than that of the coil tubing, ensuring a versatile and practical solution for a wide range of coil tubing setups. Streamlined Operation: Optimizes the process of rigging up dimple connectors, significantly reducing setup time and enhancing overall operational efficiency. Field-Ready Solution: Compact and portable, the MDT is designed to be easily transported and used in various field locations, ensuring that your operations can proceed smoothly and without interruption. Maximize your coil tubing operations with the MDT Mechanical Dimple Tool from Marlin Oil Tools, a leading-edge solution designed for the efficient attachment of dimple connectors in the oil and gas industry. With its reliable design and innovative two-half construction, the MDT offers unparalleled versatility and ease of use, making it a must-have tool for securing connectors to coil tubing, regardless of diameter discrepancies. Whether you're in the field or on the rig, the MDT Mechanical Dimple Tool ensures a quick, secure, and efficient connector setup, enhancing your operational flexibility and productivity. Choose the MDT for a dependable, user-friendly solution to your coil tubing connector installation needs. Why Choose the MDT Mechanical Dimple Tool from Marlin Oil Tools? Enhanced Connector Installation Efficiency: Provides a quick and secure method for attaching dimple connectors, streamlining your operations. Superior Design for Field Operations: Built with durability and versatility in mind, ensuring reliable performance under diverse conditions. User-Friendly Operation: Designed for ease of use, enabling efficient field application without the need for extensive training. Flexible and Versatile: Adapts to a wide range of connector sizes, overcoming challenges related to coil tubing diameter variations. The MDT Mechanical Dimple Tool by Marlin Oil Tools represents the cutting edge in coil tubing equipment, offering a practical, efficient, and reliable solution for enhancing your well intervention and maintenance operations. Incorporate the MDT into your toolkit for a smoother, more efficient coil tubing connector installation process.

Maximize Your Downhole Retrieval Success with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the specialized and high-stakes environment of oil and gas exploration and production, the right tools can make a significant difference in operational efficiency, safety, and cost-effectiveness. Recognizing the industry’s needs, HOCA Oil Tools introduces its line of Internal Fishing Neck Pulling Tools, expertly designed to address the challenges of downhole tool retrieval. Our products stand as a testament to our commitment to innovation, offering precision-engineered solutions to enhance your downhole operations. HOCA’s Internal Fishing Neck Pulling Tools: Precision-Engineered for Optimal Performance Crafted for the safe and efficient retrieval of downhole equipment with internal fishing necks, HOCA Oil Tools' Internal Fishing Neck Pulling Tools are essential for any downhole operation requiring tool retrieval. Engineered with the highest standards of quality and precision, these tools are designed to securely latch onto internal fishing necks, providing a reliable grip for retrieval without causing damage to the wellbore or the tools themselves. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means selecting a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to quality, innovation, and customer service ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your operational toolkit positions your projects for greater success, offering the reliability and efficiency needed to tackle the complexities of modern downhole activities. With HOCA Oil Tools, you gain more than just a product; you gain a strategic advantage in your downhole operations, backed by our expertise and support. Opt for HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Internal Fishing Neck Pulling Tools to enhance their operational capabilities. Elevate your downhole operations with HOCA Oil Tools – where technology, precision, and reliability converge to drive your success.

Introducing the PDM (Positive Displacement Motor) from Marlin Oil Tools: The Ultimate Downhole Tool for Enhanced Coil Tubing Operations Marlin Oil Tools is proud to unveil the PDM (Positive Displacement Motor), a revolutionary downhole tool designed to maximize efficiency in coil tubing operations across the oil and gas industry. Engineered to convert the flow energy of pumping fluid into rotational force, the PDM is essential for a range of operations, from milling and cleanouts to supporting mechanical tubing cutters and Venturi junk baskets. Key Features of the PDM (Positive Displacement Motor): Energy Conversion: The PDM's main function is to transform pumping fluid energy into the rotation of the bearing mandrel, optimizing the performance of downhole tasks. Versatile Applications: Ideal for milling, cleanout operations, and as a driving force for mechanical tubing cutters and Venturi junk baskets, enhancing operational flexibility. Dual-Section Design: Comprises a robust bearing section and a power section, each designed to withstand the demands of downhole environments. Innovative Power Section: Features a stator with an inner spiral surface and a rotor with an outer spiral surface, ensuring efficient energy conversion and consistent torque. Continuous Tool Rotation: Guarantees that any tool installed below the motor receives continuous rotation, improving operational efficiency and effectiveness. Optimized for Coil Tubing: Specifically tailored for integration into the BHA during coil tubing operations, ensuring seamless performance and reliability. Elevate your coil tubing operations with the PDM (Positive Displacement Motor) from Marlin Oil Tools, a cutting-edge solution designed to transform fluid energy into mechanical rotation, optimizing downhole tasks. Whether it's milling, cleanouts, or supporting other downhole tools, the PDM enhances operational flexibility and efficiency. With its innovative power section and robust bearing assembly, the PDM ensures consistent tool rotation and performance, making it an indispensable tool for the oil and gas industry. Choose the PDM from Marlin Oil Tools for unparalleled efficiency and reliability in your downhole operations. Why Choose the PDM from Marlin Oil Tools? Enhanced Milling and Cleanout Efficiency: Specifically engineered to boost performance in critical downhole tasks. Broad Operational Flexibility: Compatible with a variety of tools and tasks, ensuring adaptability to your operational needs. Reliable Performance: Designed with durable components that guarantee consistent operation and longevity. Seamless Integration: Easily integrates into your existing BHA setup, providing a smooth operation during coil tubing interventions. The PDM (Positive Displacement Motor) by Marlin Oil Tools represents the forefront of downhole tool technology, offering oil and gas operators a powerful tool for improving efficiency and outcomes in well interventions. Incorporate the PDM into your operations to achieve superior results and operational excellence.

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment.

Introducing the X-SPAN Tubing/Casing Patch System from ID OILTOOLS! This proven, durable and dependable system is the solution you've been looking for to seal perforations, holes, splits, corrosion or leaks of any kind in all types of tubulars. The X-SPAN system is incredibly versatile and can be deployed using a myriad of methods in virtually any type of well bore. It's the economical and reliable solution for a wide range of applications, including shutting off unwanted water or gas influx, zonal protection for frac-through applications, repairing tubular leaks from pin holes to collar leaks, repairing corroded or eroded tubing or casing, as well as isolating frac ports and auxiliary tools in horizontal wells. With its large bore, the X-SPAN system allows for easy passage of service tools including bridge plugs, drop balls, seal bore assemblies, logging tools and perforating systems. Plus, its minimal surface equipment required for deploying the patch and rigless intervention results in significant savings for the operator. The metal-to-metal X-SPAN seal is proven technology engineered for high temperature applications while yielding the highest burst and collapse pressure ratings in the industry. The X-SPAN Tubing Casing Patch can be deployed to protect up to 300ft (91m) sections of tubing or casing on a single trip. Multi-trip stackable systems are available to span intervals longer than 300ft (91m). At ID OILTOOLS, we understand that extreme well bore environments require premium alloys. That's why we offer custom sized X-SPAN systems designed using premium alloys to meet your specific needs. Choose the X-SPAN Tubing/Casing Patch System from ID OILTOOLS for proven, reliable and versatile tubular repair solutions. Contact us today to learn more!

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917)

The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Harnessing Mathematical Expertise for the Oil Industry: University of Waterloo’s Faculty of Mathematics Co-op Program We are excited to introduce our Faculty of Mathematics Co-op Program as a pivotal resource for the oil industry in Western Canada. Our co-op students, celebrated for their expertise and passion, are uniquely equipped to contribute to the oil industry's complex challenges and innovations. Diverse Undergraduate Mathematics Programs Our undergraduate programs offer a broad range of mathematical expertise: Specialized Fields: Actuarial Science, Applied Mathematics, Biostatistics, and Mathematical Physics, providing analytical and problem-solving skills crucial for risk assessment and scientific research in the oil industry. Interdisciplinary Degrees: Double degrees in Business Administration and Computer Science or Mathematics, blending business acumen with technical proficiency. Data Science and Computational Mathematics: Focused on data analysis and computational techniques, key for optimizing operations and decision-making. Computer Science and Information Technology Management: Offering technological and managerial insights vital for digital transformation in the oil sector. Financial and Risk Management: Specializations in Mathematical Finance and Risk Management, essential for economic analysis and financial strategy. Graduate Programs Master's Programs: Including Computational Mathematics, Data Science and Artificial Intelligence, and Computer Science, producing advanced expertise in fields increasingly relevant to the oil industry’s technological and analytical needs. Why Incorporate Waterloo’s Math Co-op Students? Real-World Experience: Our students bring hands-on experience, having worked in diverse environments, preparing them for immediate impact. Innovative and Analytical Skills: Trained to tackle complex problems, they can provide innovative and data-driven solutions. Adaptability and Versatility: Their diverse educational backgrounds make them adaptable to various roles within the oil industry, from data analysis and IT management to financial planning and risk assessment. By integrating co-op students from the University of Waterloo’s Faculty of Mathematics, employers in the Western Canadian oil industry can significantly enhance their workforce with advanced mathematical skills, innovative thinking, and a commitment to data-driven approaches. These students are prepared to contribute meaningfully to the industry's technological advancements and strategic initiatives.

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.