Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
New here? Sign up
Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
New here? Sign up
K Storm Choke 2 1/2 inch
Also known as:
storm choke, ambient valve, k safety valveBuy
Made to Order
Manufacturer
New
API
Land Freight
Title:
2-1/2 inch Ambient ValveModel Number:
kAvailability:
Made to OrderDelivery Time (weeks):
3 weeksChoose
Midastream Supply Company in Airdrie
For product or service information, customizing, or other questions
Transaction Type
BuyCondition
NewWeight
less than 30 lbsLocation
CanadaCompany Type
Product ProviderQuality Assurance
APIPrice
Request for Quote Dependant on SpecMaterial
13 ChromeBrand Name
HalliburtonShipping
Land FreightNotes
2-1/2 inch Annular Vent and Sleeve
Surface controlled annular vent and sleeve valveMidastream Supply Company in Airdrie
An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
SSV 4.51 inch for Water Injection Wells
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
9-5/8 inch Halliburton TR-SCSSSV SP
SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product & Service
New
API
Land Freight
NE Safety Valve, Surface Controlled 4-1/2 inch
SCSSSVMidastream Supply Company in Airdrie
The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The manufacturer offers two types of control-line protectors — both designed to provide maximum control-line protection. The first type of protector is a unique design that combines a steel outer shell and a resilient inner liner. The second type is all metal, which provides fullover-the-coupling protection for virtually any size electrical submersible pump cable, bare tube, or encapsulated bundle configuration. The all-metal protector is also available for mid-joint applications. A variety of channels that can accommodate a combination of bare control lines and/or dual encapsulated control line is offered for each of the protectors. Both types of protectors use a tapered pin lock to provide maximum gripping force. The tapered pin lock can be installed by hand and driven to the locked position by a pneumatic hammer or a manual hammer tool. *information sourced from manufacturer
Buy
In Stock
Product
New
API
Land Freight
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
WI Valve for injection wells (3.39 inch)
3.39 inch safety valveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Sea Freight
Water Injection Well Flow Control Valve 4.31 inch
WI Safety ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
9-5/8 inch Halliburton TR-SCSSSV SP
SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Water Injection Well Flow Control Valve 4.31 inch
WI Safety ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
FH Hydrostatic Retrievable Packer
FH SIngle SetMidastream Supply Company in Airdrie
The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917)
Buy
Made to Order
Product
New
API
Sea Freight
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
OilHungry in Stoney Creek
The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Midastream Supply Company in Airdrie
Baker Hughes introduces the SABRE™ mechanical-set retrievable packer. This packer is a single-string retrievable packer based on the proven performance and reliability of the Hornet packer. It is especially designed to perform reliably in standard-pressure injection and production applications. It is a tension set or compression set and can be landed in compression, tension, or a neutral condition. The SABRE provides reliable performance in a retrievable packer under combined conditions of 250°F (121.1°C) and 7,000 psi (482.6 bar) differential above or below the packer. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
CWB National Leasing in Winnipeg
Revolutionize Your Manufacturing with CNC Machine Leasing from CWB National Leasing Enhancing Precision and Productivity in Your Operations with Advanced Equipment Solutions For businesses in manufacturing, engineering, or fabrication, CNC (Computer Numerical Control) machines are pivotal for enhancing precision, efficiency, and versatility in production. Leasing CNC machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their manufacturing capabilities. Here’s how leasing CNC machines can benefit your business: 1. Quick Access to State-of-the-Art Equipment CWB National Leasing values the pace of your business operations and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your CNC machines can be delivered and operational quickly. This efficiency minimizes downtime and enhances your production capacity, allowing you to meet customer demands more effectively. 2. Increased Financial Flexibility Leasing CNC machines with CWB National Leasing boosts your financial power. It allows you to spread costs over periodic payments rather than making a significant upfront investment, freeing up capital for other vital business needs. The option to add extra features or accessories to your CNC machines for a small payment increase enables customization to meet specific production requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your CNC machines start contributing to your business’s revenue while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing CNC machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can impact your taxes.
Service
In Stock
Service
New
ISO
Single Row Deep Groove Ball Bearing
Ball BearingMidastream Supply Company in Airdrie
Deep groove ball bearings are similar to traditional bearings but have raceways that closely fit the dimensions of the balls that run in them. These deep grooves result in balls that are more stable and can handle higher loads than shallow-groove bearings.
Buy
Made to Order
Product
New
ISO
Sea Freight
CWB National Leasing in Winnipeg
Accelerate Your Construction Projects with Excavator Leasing from CWB National Leasing Enhance Your Operational Efficiency and Financial Flexibility In the dynamic world of construction, having access to advanced equipment like excavators is key to staying competitive and efficient. Leasing your excavator through Canadian Western Bank (CWB) National Leasing offers a versatile and financially astute solution that aligns with your project needs and budget. Here’s how leasing an excavator can be a game-changer for your construction business: 1. Swift Equipment Delivery CWB National Leasing prioritizes speed and efficiency. They review your application promptly and typically notify your equipment dealer about the payment within 48 hours of approval. This rapid process means your excavator can be delivered and operational in no time, keeping your projects on track. 2. Boosted Purchasing Power With CWB National Leasing, you can enhance your financial leverage. Opt for manageable periodic payments instead of a large upfront cost, freeing up capital for other critical business needs. Plus, the flexibility to add extra features or accessories to your excavator with a minor increase in payments further enhances its utility and efficiency. 3. Balanced Cash Flow Management Leasing an excavator allows for smaller payments over the term of the lease, enabling the equipment to start generating revenue while you're still paying for it. This approach helps maintain a favorable balance between your expenses and income. 4. Adaptable Payment Plans CWB National Leasing offers tailor-made payment options, including seasonal, semi-annual, or annual plans, to align with your business's cash flow. This adaptability is especially crucial in the construction industry, where income can vary based on project timelines. 5. Potential Tax Advantages Leasing can offer significant tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the excavator. It's advisable to consult with a tax advisor to understand how leasing can improve your business’s tax position. Conclusion Opting to lease an excavator through CWB National Leasing is a strategic decision that empowers your construction business with the right tools while maintaining financial agility. It enables you to deploy state-of-the-art excavators in your projects while managing your finances effectively, paving the way for enhanced efficiency, growth, and profitability in the competitive construction market.
Service
In Stock
Service
New
ISO
Positive Displacement Motor for Coiled Tubing Applications
PDM Positive Displacement MotorMarlin Oil Tools in Calgary
Introducing the PDM (Positive Displacement Motor) from Marlin Oil Tools: The Ultimate Downhole Tool for Enhanced Coil Tubing Operations Marlin Oil Tools is proud to unveil the PDM (Positive Displacement Motor), a revolutionary downhole tool designed to maximize efficiency in coil tubing operations across the oil and gas industry. Engineered to convert the flow energy of pumping fluid into rotational force, the PDM is essential for a range of operations, from milling and cleanouts to supporting mechanical tubing cutters and Venturi junk baskets. Key Features of the PDM (Positive Displacement Motor): Energy Conversion: The PDM's main function is to transform pumping fluid energy into the rotation of the bearing mandrel, optimizing the performance of downhole tasks. Versatile Applications: Ideal for milling, cleanout operations, and as a driving force for mechanical tubing cutters and Venturi junk baskets, enhancing operational flexibility. Dual-Section Design: Comprises a robust bearing section and a power section, each designed to withstand the demands of downhole environments. Innovative Power Section: Features a stator with an inner spiral surface and a rotor with an outer spiral surface, ensuring efficient energy conversion and consistent torque. Continuous Tool Rotation: Guarantees that any tool installed below the motor receives continuous rotation, improving operational efficiency and effectiveness. Optimized for Coil Tubing: Specifically tailored for integration into the BHA during coil tubing operations, ensuring seamless performance and reliability. Elevate your coil tubing operations with the PDM (Positive Displacement Motor) from Marlin Oil Tools, a cutting-edge solution designed to transform fluid energy into mechanical rotation, optimizing downhole tasks. Whether it's milling, cleanouts, or supporting other downhole tools, the PDM enhances operational flexibility and efficiency. With its innovative power section and robust bearing assembly, the PDM ensures consistent tool rotation and performance, making it an indispensable tool for the oil and gas industry. Choose the PDM from Marlin Oil Tools for unparalleled efficiency and reliability in your downhole operations. Why Choose the PDM from Marlin Oil Tools? Enhanced Milling and Cleanout Efficiency: Specifically engineered to boost performance in critical downhole tasks. Broad Operational Flexibility: Compatible with a variety of tools and tasks, ensuring adaptability to your operational needs. Reliable Performance: Designed with durable components that guarantee consistent operation and longevity. Seamless Integration: Easily integrates into your existing BHA setup, providing a smooth operation during coil tubing interventions. The PDM (Positive Displacement Motor) by Marlin Oil Tools represents the forefront of downhole tool technology, offering oil and gas operators a powerful tool for improving efficiency and outcomes in well interventions. Incorporate the PDM into your operations to achieve superior results and operational excellence.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Injection Valve Subsurface Safety 4.48 inch
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Cleanstream B.V. in Ter Apel
Mercury contamination can be a serious problem for many industries, but Cleanstream has the solution. Our specialized Mercury decontamination process uses green, non-corrosive chemicals to treat even the most complicated materials and objects, removing stubborn dirt and hard-to-reach areas. We take pride in using a release value of only 1mg/kg, ensuring safety and compliance with regulations. Before beginning any cleaning process, we take a sample of the contamination and examine it using XRF analysis in our internal laboratory. We share the results with our clients to ensure transparency and quality in our work. At Cleanstream, we understand the importance of cleaning without damage. Our experts are experienced workers who have developed inventive cleaning methods to ensure that materials are not damaged during the cleaning process. We also carefully disassemble materials for optimal cleaning, ensuring that every part is properly treated. We believe in sustainable solutions, which is why we take care of the removal of mercury-containing waste from decontamination. The cleaned materials can be reused or recycled for further use. Cleanstream is committed to providing fast and cost-effective services without compromising safety or quality. We are constantly improving our processes to reduce waste and provide green solutions. Join us in our mission to promote safety and sustainability in your industry. Contact Cleanstream today to experience our innovative and efficient Mercury decontamination process. With our safe, green, and effective solutions, you can trust us to deliver the best possible results for your business.
Service
In Stock
Service
New
ISO
Land Freight
Bottomhole Pressure Instrument Hangers and Tools
Downhole ToolsHoca Oil Tools in Zwartemeer
Elevate Downhole Efficiency with HOCA Oil Tools' BHP Tools for Landing Nipples In the sophisticated world of downhole operations, where precision and efficiency govern success, the significance of specialized tools cannot be overstated. HOCA Oil Tools, at the forefront of downhole technology, proudly presents our line of BHP Tools for Landing Nipples, specifically engineered to support wireline operations and ensure seamless integration and functionality in landing nipple environments. HOCA's BHP Tools for Landing Nipples: Unmatched Precision and Reliability Designed with the end-user in mind, our BHP Tools for Landing Nipples offer a comprehensive solution for monitoring bottom-hole pressure (BHP) and other downhole parameters. These tools are essential for optimizing wireline operations, allowing for accurate data recording and ensuring the safe and secure placement of geophysical instruments within landing nipples. Crafted from premium materials and engineered to withstand the challenging downhole environment, our BHP tools exemplify our dedication to quality, innovation, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we understand the challenges faced in the oil and gas industry and are committed to providing solutions that enhance operational success. Our BHP Tools for Landing Nipples represent this commitment, offering a level of precision, efficiency, and reliability that sets new industry standards. Choosing HOCA’s BHP Tools for your downhole operations means not only equipping yourself with superior tools but also partnering with a company that stands behind its products with unparalleled support and expertise. Opt for HOCA Oil Tools for your landing nipple needs and take your downhole operations to the next level. Partner with us to leverage the advantages of our BHP Tools and experience enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, elevate your wireline operations with tools that blend innovation with reliability – driving your success downhole.
Buy
In Stock
Product & Service
New
API
Air Freight
Eleks in Toronto
Unlock Rapid Development Excellence with ELEKS Smart Team In the fast-paced world of software development, staying ahead demands innovation, efficiency, and expertise. ELEKS Smart Team offers you the key to rapidly scale your development capabilities and drive your project towards success. With a track record of over 700 end-to-end projects and a roster of more than 2000 skilled experts, we empower you to achieve unparalleled development excellence. ELEKS Smart Team: Your Partner in Progress Accelerate Time-to-Market: Your success hinges on speed. ELEKS Smart Team accelerates your product's journey to the market by offering best-fit resources, establishing an efficient Software Development Lifecycle (SDLC), crafting a comprehensive Quality Assurance strategy, and providing expert project management. Our efficiency-boosting scope decomposition reduces your time-to-market, ensuring you seize opportunities faster. Focus on Core Business: In the realm of development, every moment counts. Regardless of your project's SDLC stage, we seamlessly take on your requirements, handling even the most intricate software development needs. By entrusting us with these tasks, you gain the invaluable gift of time, enabling you to focus on developing your core business and nurturing your unique strengths. Empower Your Existing Team: Success thrives on collaboration. ELEKS Smart Team adopts your culture seamlessly, facilitating the uptake of process and behavioral changes within your internal teams. We assist in enhancing team competencies, sharing our expert knowledge in emerging technologies and process frameworks. Empowerment is at the heart of our approach. How ELEKS Smart Team Works: Optimized Team Allocation: We decode your requirements to curate an optimized team of experts from our pool of over 2000 software professionals. Every member is chosen to fit the unique task at hand, ensuring superior results. Expert Team Management: Our dedicated teams operate as distinct entities, aligned with your requirements and governed by our rigid standards. This setup frees you to concentrate on core business deliverables, knowing your project is in capable hands. Streamlined Project Kick-Off: From the very outset, we synchronize smart teams and establish effective communication channels. Our ELEKS Project Managers and Technical Leads ensure seamless coordination, setting the stage for success. Transparent Delivery Framework: Transparency fuels confidence. ELEKS Smart Team operates within a unique delivery framework that combines Agile methodologies, experience, and robust security standards. This approach guarantees consistent, predictable, and transparent results, providing full visibility at every step. ELEKS Smart Team: Your Partner for Rapid Progress With an impressive Net Promoter Score (NPS) of 69 and a roster of the top 1% of Ukrainian engineering talent, ELEKS Smart Team is your catalyst for unparalleled development excellence. Let us pave the way for your success, turning challenges into opportunities and aspirations into achievements. Experience the power of rapid development with ELEKS Smart Team, where innovation meets expertise.
Service
In Stock
Service
New
ISO
Hoca Oil Tools in Zwartemeer
Revolutionize Cementing and Acidizing Operations with HOCA Oil Tools' Dump Bailers In the dynamic and challenging environment of downhole operations, the need for precise, efficient, and reliable tools has never been greater. HOCA Oil Tools, a pioneer in downhole slick line technology, is at the forefront of this demand with its state-of-the-art Dump Bailers. Specifically designed for targeted applications such as cementing and acidizing, these tools play a pivotal role in enhancing well integrity and performance. HOCA Dump Bailers: Precision in Every Drop Our Dump Bailers are engineered to deliver materials like cement, acids, or other substances directly to the required downhole location with utmost precision. Constructed from durable materials resistant to harsh chemicals and high pressures, HOCA's Dump Bailers ensure that even the most demanding downhole conditions can be tackled with confidence and control. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and demands of modern oil and gas extraction. Our Dump Bailers are designed with this understanding at their core, providing innovative solutions that address the specific needs of downhole operations. By integrating our tools into your operations, you gain access to a level of precision, efficiency, and reliability that sets new industry standards. Invest in HOCA's Dump Bailers to leverage their benefits in your downhole operations. Whether you are executing precise cement plugs, combating downhole leaks, or enhancing production through acidization, our tools provide the solutions you need to achieve optimal results. Discover the difference that HOCA Oil Tools can make in your downhole operations. With our commitment to quality, innovation, and customer service, we provide not just tools, but comprehensive downhole solutions that drive your success. Join the ranks of satisfied clients who have experienced the transformative impact of HOCA’s Dump Bailers in their operations. Choose HOCA Oil Tools for unparalleled downhole solutions that elevate your operational efficiency, safety, and success.
Buy
In Stock
Product & Service
New
API
Air Freight
Voice, data, and video Services
Nulux Networks in Edmonton
Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence.
Service
In Stock
Service
New
ISO
Provix in New Lowell
Introducing the WISE LITE 2: The Ultimate Cordless Miner's Cap Lamp from Provix Provix is proud to unveil the WISE LITE 2, a superior cordless miner's cap lamp designed for the rigorous demands of the mining industry. Combining cutting-edge technology with the highest safety standards, the WISE LITE 2 is an essential piece of equipment for any miner. Exceptional Lighting Performance The WISE LITE 2 is equipped with a high-capacity 7,000mAh battery, offering a continuous discharging time of 16 hours. This ensures long-lasting illumination for extended work periods. The main light has a working voltage of 3.0V, a current of 400 mA, and a power of 1.2W, producing a luminous flux of 167 lumens. With an initial lighting degree of 8,500 Lux, it provides excellent visibility in the darkest environments. Built to Last Durability is key in mining equipment, and the WISE LITE 2 stands out in this aspect. It boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends to 1,200 cycles under reasonable working conditions, highlighting its reliability and longevity. Safety and Compliance Safety is a top priority, and the WISE LITE 2 meets the highest safety standards. It is explosion-proof, MSHA certified, and has an IP68 waterproof rating. The short circuit protection time of less than 320μs ensures additional safety in hazardous conditions. Ergonomic and Convenient Design The WISE LITE 2 is designed for comfort and ease of use. Weighing just 169g (5.96 oz) and measuring 84x69x50mm (3.3x2.7x2.0in), it is compact and lightweight, making it ideal for long shifts. The quick charging time of 4 hours means it’s ready to go when you are. Versatile for Various Applications While designed for mining, the WISE LITE 2 is also suitable for a variety of other applications such as construction, emergency rescue, outdoor adventures, and more, offering versatility and dependability in any setting. Get Your WISE LITE 2 Today Elevate your mining operations with the reliable, efficient, and safe WISE LITE 2. Available now at Provix, this cordless miner's cap lamp is the solution for advanced lighting in challenging environments. Visit www.provix.net for more details or to make a purchase.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Cranes, hoists, and lifts Leasing
CWB National Leasing in Winnipeg
Elevate Your Construction Business with Crane, Hoist, and Lift Leasing from CWB National Leasing Transform Your Operations with Flexible Equipment Leasing In the dynamic world of construction, having access to the right equipment like cranes, hoists, and lifts can be a game-changer for your business. Canadian Western Bank (CWB) National Leasing provides an excellent opportunity to lease this vital equipment with terms that align with your business needs. Here's how CWB National Leasing makes leasing cranes, hoists, and lifts a wise decision for your construction business: 1. Speedy Equipment Access Time is crucial in construction, and CWB National Leasing understands this. They offer a fast and efficient leasing process, often approving applications within 48 hours. This rapid turnaround means you can have your crane, hoist, or lift on-site and operational with minimal delay. 2. Enhanced Purchasing Power With CWB National Leasing, you can maximize your financial resources. Leasing allows for manageable periodic payments instead of a substantial upfront investment, freeing up capital for other business areas. Plus, you can customize your equipment with additional features or accessories for a slight adjustment in payment. 3. Effective Cash Flow Management Manageable lease payments spread over time mean your equipment can start generating revenue for your business while you are paying for it. This helps maintain a healthy balance between your income and expenditures. 4. Flexible Payment Options CWB National Leasing offers adaptable payment plans, including seasonal, semi-annual, or annual options. This flexibility ensures that your payments align with your business's cash flow, especially important in the construction industry where project timelines and revenue can vary. 5. Potential Tax Benefits Leasing can offer tax advantages, such as the ability to expense lease payments, as opposed to depreciating the capital cost of equipment. Always consult with a tax advisor to understand how leasing can benefit your business’s tax situation. 6. Customized Payment Structures CWB National Leasing tailors its leases to fit your unique business needs. Payment plans are designed to match your specific cash flow, ensuring the lease works for your business model. 7. Diverse Buyout Options At the end of your lease, a variety of buyout options are available, from as low as $1 to up to 50% of the total equipment cost. This flexibility allows for eventual ownership of your crane, hoist, or lift. 8. Fair Market Value and Adaptive Payment Options You can opt to defer a portion of the equipment’s cost to the end of the lease, with options to purchase at fair market value or to upgrade to newer models. The step-up or step-down payment options are ideal if you anticipate fluctuations in your cash flow. 9. Seasonal Payment Plans Ideal for businesses with seasonal cash flows, CWB National Leasing can design payment schedules that suit your specific revenue patterns, such as a six-month-on, six-month-off plan. Conclusion Leasing cranes, hoists, and lifts through CWB National Leasing is a strategic decision that can significantly enhance your construction operations. It offers a way to access essential, high-value equipment while maintaining financial flexibility and stability, enabling your business to take on more projects and grow in a competitive market.
Service
In Stock
Service
New
ISO
Poseidon Robotics in Chandler
Unleash the Depths with Blue Robotics' BlueROV2 Poseidon Robotics is thrilled to introduce the BlueROV2, a versatile and high-performance Remotely Operated Vehicle (ROV) designed and built by the renowned experts at Blue Robotics Inc. Engineered to deliver exceptional value, the BlueROV2 is a testament to innovation, reliability, and affordability in the world of subsea exploration. Excellence in Stock and Ready to Ship! While we didn't design this exceptional ROV, our team at Poseidon Robotics is proud to assemble and stock the BlueROV2 for customers like you. We understand that time is of the essence in subsea operations, which is why we have BlueROV2 units ready to ship immediately. Need an ROV tomorrow? Count on Poseidon Robotics to have one dispatched today. Meticulous Assembly and Testing The BlueROV2 is more than just a remarkable product; it represents the culmination of expertise and craftsmanship. Each unit is carefully assembled by our skilled technicians, who take pride in their work to ensure every detail is perfect. Before shipping, each BlueROV2 undergoes rigorous testing, calibration, and a comprehensive factory acceptance test to meet the highest standards of quality and performance. Explore the Configuration The BlueROV2 comes with a powerful and agile 6 thruster frame, offering you unparalleled maneuverability in the water. Crafted from robust aluminum tubes, the frame is built to endure the demanding conditions of underwater environments. The Newton Gripper enhances your ROV's capabilities, allowing you to interact with the underwater world effortlessly. Illuminate your subsea adventures with 4 Lumen lights, providing excellent visibility even in the darkest waters. To ensure seamless operation, we've equipped the BlueROV2 with a specially modified tether quick disconnect for hassle-free connections. With 150m of tether on a reliable reel, you have the freedom to explore vast distances below the surface. Your Complete ROV Package Poseidon Robotics believes in providing you with everything you need to embark on your underwater missions immediately. When you choose the BlueROV2, you get more than just the ROV; you receive a comprehensive package to enhance your subsea experience: 1. BlueROV2 as Configured: Ready to dive and explore right out of the box. 2. Fathom Spool with 150m Tether: Experience the freedom to roam with a generous length of tether. 3. 1 Battery + Charger: Stay powered up and keep your ROV running smoothly. 4. Upgraded Tools and Spares Kit: We've included essential tools and spares to keep your ROV at peak performance. 5. Seahorse Wheeled Transport Cases: Secure and transport your BlueROV2 effortlessly with foam-padded cases. Specifications • Shipping Dimensions: o Case 1 (ROV): 29”x 23”x 16”, 55lbs o Case 2 (Reel/Tether): 29”x 23”x 16”, 53lbs o Case 3 (Batt/Spares/Tools): 24”x 16”x 10”, 25lbs Assurance of Quality At Poseidon Robotics, we stand behind our products. The BlueROV2 comes with a 90-day limited warranty, ensuring your peace of mind as you embark on your underwater adventures. Embrace Exploration with the BlueROV2 Are you ready to dive into the wonders of the deep? The BlueROV2 is your gateway to an awe-inspiring subsea world. With Poseidon Robotics' fast shipping, assembling and testing expertise, you can begin your underwater exploration journey without delay. Let the BlueROV2 be your trusted companion for your most ambitious subsea projects. Contact us today to dive deeper and discover the BlueROV2 difference!
Buy
In Stock
Distributor
New
ASME
Air Freight
Message:
To: supplier
Grid Dirt Construction in Red Deer
Precision Performance to Drive Costs Down and Profitability Up The Cat® MD6310 drill rig is a powerful, flexible tool that can help you get the most out of your drilling operation. It offers a wide variety of features and options designed to meet your site’s specific needs and challenges, with an updated cab that keeps operators safe and comfortable while increasing performance and productivity. Infused with the latest technologies, the MD6310 not only increases productivity and allows for automated drilling, but also improves the efficiency of all downstream operations. Designed to drill holes from 203-279 mm (8-11 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes.
Buy
Currently in Use
Distributor
New
ISO
Land Freight
PipeDNA in Houston
Streamlining OCTG Tubular Goods Management with PipeDNA: Boosting Efficiency and Reliability Efficient management of OCTG (Oil Country Tubular Goods) is critical in the oil and gas industry to ensure the success of drilling and production operations. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their OCTG tubular goods, increase visibility, and optimize their operations for enhanced efficiency and reliability. Comprehensive Inventory Management and Tracking: PipeDNA offers a comprehensive inventory management and tracking system specifically tailored for OCTG tubular goods. Gain full visibility into your OCTG inventory, including utilization, activity, and trends. By monitoring the status and location of each OCTG pipe, stakeholders can proactively plan for upcoming drilling projects, streamline logistics, and optimize inventory levels. PipeDNA enables accurate tracking, reducing the risk of stockouts, minimizing downtime, and maximizing operational efficiency. Efficient Logistics Management: With PipeDNA, stakeholders can efficiently manage all aspects of logistics operations related to OCTG tubular goods. From shipments to status tracking and documentation, PipeDNA simplifies the entire process, ensuring seamless coordination across multiple locations and parties involved. Furthermore, the platform facilitates pipe bundling, enabling stakeholders to optimize transportation and storage, minimizing costs and improving overall efficiency. Streamlined Inspection Management: PipeDNA's inspection management feature provides a centralized platform to manage inspection jobs for OCTG tubular goods across multiple sites. With real-time tracking and status updates, stakeholders can monitor the progress of inspection jobs, ensuring timely completion and adherence to quality standards. Additionally, the platform enables the management of inspection profiles, allowing for efficient scheduling, tracking, and reporting of inspection activities. Automated Tally Operations: Pipe tallying is a crucial process in OCTG tubular goods management, and PipeDNA simplifies this operation with automated tally operations. Stakeholders can create and manage tally operations within the platform, streamlining the process and eliminating manual calculations. By automating pipe tally jobs and workflows, PipeDNA saves time, reduces errors, and ensures accurate and up-to-date tally results, enhancing overall operational efficiency. Enhanced Identification and Traceability: PipeDNA offers quick and accurate identification of OCTG tubular goods, providing stakeholders with essential pipe details, activity history, and traceability documentation. With seamless integration of popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables easy identification and tracking of each pipe, ensuring precise inventory control and reducing the risk of misplaced or misused OCTG tubular goods. This enhanced traceability minimizes downtime and improves resource allocation. Designed for the Oil and Gas Industry: PipeDNA was specifically designed for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in OCTG tubular goods management. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your OCTG operations and drive efficiency. Leveraging Emerging Technologies: At its core, PipeDNA harnesses the power of today's emerging technologies to optimize OCTG tubular goods management processes. The platform seamlessly integrates with popular barcode standards, such as UPC, EAN, and QR codes, enabling efficient barcoding and labeling. Moreover, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking. The platform also facilitates IoT data integration using the MQTT standard, enabling fast and reliable sensor data integration for enhanced decision-making. PipeDNA revolutionizes OCTG tubular goods management in the oil and gas industry, providing a smart cloud-based platform that enhances efficiency, reliability, and visibility. With its comprehensive inventory management, streamlined logistics operations, automated tallying, and robust identification and traceability features, PipeDNA empowers stakeholders to optimize their OCTG operations and make informed decisions based on real-time data. Leverage the power of PipeDNA and take your OCTG tubular goods management to new heights of efficiency and reliability.
Service
Currently in Use
Service
New
API
Air Freight
Inverter and Charger Combination
MultiPlus Inverter/ChargersAMS Hydro in Vancouver
Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue
Buy
Made to Order
Product
New
ASME
Land Freight
ALCiT in Mississauga
Unlock the Future of Datacenter Virtualization with ALCiT's VMware Partnership In the realm of technological innovation, few names shine as brilliantly as VMware. As part of the Dell EMC family and the driving force behind transformative tech advancements, VMware stands as a beacon of excellence in the IT landscape. ALCiT is thrilled to be more than just a partner – we're your gateway to a future defined by datacenter virtualization. VMware: The Powerhouse Behind Industries With an ecosystem of over 30,000 partners, VMware's influence has been nothing short of revolutionary. Through tech innovations that have changed the very fabric of industries, VMware has redefined what's possible in the digital realm. ALCiT's partnership with VMware is your ticket to harnessing this unparalleled potential. Virtualization: The Heartbeat of Efficiency Efficiency Redefined: No datacenter achieves its true potential without the magic of virtualization. At its core, VMware's platform embodies efficiency, enabling you to manage your resources with unmatched ease. Mastery of the Platform: At ALCiT, VMware isn't just a tool; it's our canvas. We know VMware like the back of our hand – from selling and configuring to maintaining and maximizing its capabilities. Seamless Integration: Virtualization isn't just about technology; it's about integration. ALCiT ensures that VMware seamlessly integrates into your ecosystem, propelling you toward unparalleled efficiency. Unleash the Power of VMware with ALCiT Consultation: Dive deep into the world of VMware with ALCiT's expert guidance. Together, we'll map out a virtualization strategy that empowers your digital journey. Configuration and Implementation: From conceptualization to reality, ALCiT configures and deploys VMware to align perfectly with your needs. Ongoing Support: Virtualization isn't just a one-time event; it's an ongoing journey. ALCiT's unwavering support ensures that your VMware experience remains flawless. Embrace the Future Today ALCiT's partnership with VMware isn't just a collaboration; it's your path to datacenter transformation.
Service
Made to Order
Service
New
ISO
CWB National Leasing in Winnipeg
Boost Your Cleaning Efficiency with Vacuum Leasing from CWB National Leasing Enhancing Your Business Operations with Flexible and Economical Equipment Solutions For businesses in the janitorial, hospitality, or commercial cleaning industries, high-quality vacuums are essential tools for maintaining cleanliness and hygiene. Leasing vacuums through Canadian Western Bank (CWB) National Leasing offers a practical and financially sound solution to meet your cleaning requirements. Here’s how leasing vacuums can benefit your business operations: 1. Rapid Equipment Access CWB National Leasing understands the importance of maintaining operational continuity. They provide a fast leasing process, typically making decisions within 48 hours of application submission. This efficiency ensures that your vacuums can be delivered and ready for use quickly, enhancing your cleaning operations without delay. 2. Increased Financial Flexibility Leasing vacuums with CWB National Leasing boosts your purchasing power. Opting for periodic payments over a substantial initial purchase frees up capital for other vital business needs. The option to add extra features or accessories to your vacuums for a small payment increase allows for customization to meet specific cleaning demands. 3. Effective Cash Flow Management Manageable lease payments over the term allow your vacuums to start contributing to your business’s revenue while they're still being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, crucial for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing vacuums can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease vacuums through CWB National Leasing is a strategic decision that equips your business with essential cleaning equipment while maintaining financial flexibility.
Service
In Stock
Service
New
ISO
Sivam S.p.A. in Spoltore
Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.
Buy
In Stock
Manufacturer
New
API
Air Freight
Provix in New Lowell
Maximize Protection for Your Lighting Equipment with the Wisdom Silicone Protective Case from Provix Provix is excited to introduce the Wisdom Multi-color Silicone Protective Case (model NWI-ZCZ159), a durable and stylish accessory designed for Wisdom Cordless Lights. Available in a vibrant yellow, as well as other colors including black, green, orange, red, and white, this protective case is a perfect blend of functionality and aesthetics. Durable Silicone for Ultimate Protection Crafted from high-quality silicone, the Wisdom Protective Case offers superior protection for your cordless lights. The silicone material is robust and resilient, safeguarding your equipment against impacts, scratches, and daily wear and tear. This ensures your lighting equipment remains in top condition, ready for the demanding environments of mining and construction work. Vibrant Color Selection for Personalization Choose from a variety of colors to personalize your mining equipment. Whether you prefer the visibility of the bright yellow case or a more subdued tone like black or white, there's a color to match your style and preference. The colorful options also make it easier to identify your equipment among others, adding a layer of convenience to your workday. Designed for Wisdom Cordless Lights The Silicone Protective Case is specifically designed to fit Wisdom Cordless Lights, ensuring a snug and secure fit. This compatibility guarantees that the case provides optimal protection while maintaining the functionality and accessibility of your lights. Lightweight and Easy to Use Despite its sturdy construction, the protective case is lightweight and easy to install. Simply slip your Wisdom Cordless Light into the case for instant protection. The silicone material is flexible, allowing for easy application and removal, and does not add bulk to your equipment. Ideal for Mining and Construction Professionals Whether you're a miner, construction worker, or anyone who relies on portable lighting, the Wisdom Silicone Protective Case is an essential accessory. It not only protects your equipment but also adds a personal touch to your professional gear. Get Your Wisdom Silicone Protective Case Today Elevate the durability and style of your lighting equipment with the Wisdom Silicone Protective Case, available now at Provix. Visit our website at www.provix.net to choose from the array of colors and learn more about our range of high-quality mining equipment and accessories.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
USB Adapter Magnetic USB Charger
Self-designed Magnetic USB ConnectorsProvix in New Lowell
Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
4-1/2 inch Type MC Water Injection Safety Valve
MC Injection ValveMidastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
API
Land Freight
CWB National Leasing in Winnipeg
Accelerate Your Fabrication Success with Welder Leasing from CWB National Leasing Empowering Your Business with State-of-the-Art Welding Solutions In industries such as manufacturing, construction, automotive repair, and metalworking, high-quality welders are essential for efficient, precise, and reliable fabrication work. Leasing welders through Canadian Western Bank (CWB) National Leasing presents a flexible, cost-effective, and intelligent solution for businesses seeking to enhance their welding capabilities. Here’s how leasing welders can boost your business operations: 1. Fast Access to Advanced Welding Equipment CWB National Leasing understands the critical role of welding equipment in your operations. They offer a swift leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This rapid service means your welders can be delivered and operational quickly, enhancing your fabrication efficiency and reducing project turnaround times. 2. Enhanced Financial Flexibility Leasing welders with CWB National Leasing enhances your buying power. It allows you to allocate resources efficiently by opting for periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your welders for a small payment increase enables customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your welders start contributing to your business’s revenue while they're still being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing welders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease welders through CWB National Leasing is a strategic decision that equips your business with essential welding tools while maintaining financial agility. It ensures access to the latest welding technology, vital for high-quality fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive fabrication and manufacturing industries.
Service
In Stock
Service
New
ISO
WI Subsurface Safety Valve 2.72 inch
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Sea Freight
Nulux Networks in Edmonton
Industrial Ethernet Solutions by Nulux Network Solutions: Unifying Robust Connectivity in the Oil and Gas Sector Navigating the robust yet intricate world of the oil and gas industry necessitates a network that can not merely withstand the test of operational rigours but can effortlessly blend reliability with performance. At the heart of ensuring such seamless communications and data transfer within your intricate operational frameworks rests Industrial Ethernet, and at the helm of delivering exemplary Ethernet solutions is Nulux Network Solutions. A Beacon in the Industrial Networking Landscape: Nulux Network Solutions In a sector that doesn’t afford the luxury of pauses, your network must not merely be a conduit for communication, but a fortress of secure, unwavering, and efficient data transfers. For over two decades, Nulux has been a pivotal part of countless industrial projects across North America, offering a spectrum of networking solutions, with a notable proficiency in Industrial Ethernet solutions, among others. Our seasoned team, embodying a meticulous and perfectionist ethos, not only installs, maintains, and troubleshoots copper cabling systems including ethernet but elevates the quality of workmanship, sculpting solutions that are resilient, reliable, and tailor-fitted to your unique operational needs. The Quintessence of Copper in Your Industrial Ethernet Framework Ensuring that your business thrives in the dynamic arena of energy extraction and refinement, Nulux provides a well-rounded, comprehensive copper network design, maintenance, and upgrade solution, harnessing the intrinsic virtues of copper: Unbridled Data Transmission: Safeguarding data transfers up to 10 Gbps, ensuring your operations are never bottlenecked by data transfer delays. Unwavering Reliability: Guaranteeing a network that stands undeterred amidst operational demands. Affordability & Ease: Merging cost-effectiveness with simple installation and termination procedures. Nulux's Industrial Ethernet: Solidifying Your Operational Backbone As technology continues to weave itself into every fabric of the industry, industrial Ethernet by Nulux stands as a testament to a network solution that is flexible yet fiercely durable and reliable. Our service ambit encapsulates: Pioneering Network Designs: That dovetail impeccably with your existing and prospective operational frameworks. Constant Network Evolution: Ensuring your networks are perpetually contemporaneous, mitigating obsolescence. Bespoke Solutions: Tailoring our services to precisely cater to your unique data, voice, and video service requirements. Your Operations, Backed by Nulux’s Industrial Ethernet Expertise In a sector where every byte of data, every communication, and every connection can be pivotal, Nulux ensures that your operations are perpetually enveloped in a cocoon of sturdy, reliable, and efficient network infrastructure. Our Industrial Ethernet solutions, fortified by the proven reliability of structured cabling and our unwavering commitment to impeccable service delivery, stand as a silent, steadfast guardian of your operations, facilitating operational continuity and data integrity. Allow Nulux Network Solutions to become the architects of your network infrastructure, ensuring that while you navigate through the operational complexities of the oil and gas sector, your data travels through a network that is as resilient, reliable, and robust as your operations demand. Contact Nulux Network Solutions today, and let’s sculpt a future where your network is the least of your concerns, ensuring your focus remains undeterred – on operational excellence and industry leadership.
Service
In Stock
Service
New
ISO
CWB National Leasing in Winnipeg
Optimize Your Construction Site with Heater Leasing from CWB National Leasing Enhance Worksite Comfort and Efficiency with Tailored Leasing Solutions In the construction industry, maintaining a comfortable and safe working environment is crucial, especially in colder climates or during winter months. Construction heaters are essential for these conditions. Leasing construction heaters through Canadian Western Bank (CWB) National Leasing provides a flexible, cost-effective, and efficient solution for your business. Here’s how leasing construction heaters can benefit your construction projects: 1. Rapid Equipment Delivery CWB National Leasing prioritizes the efficiency of your operations. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your construction heaters can be delivered and operational swiftly, minimizing downtime and enhancing worksite productivity and comfort. 2. Increased Financial Flexibility Leasing construction heaters with CWB National Leasing boosts your financial agility. Choosing periodic payments over a large upfront purchase frees up capital for other vital aspects of your project. Additionally, the option to add extra features or accessories to your heaters for a small payment increase allows for customization to meet specific site needs. 3. Effective Cash Flow Management With smaller lease payments over the term, your construction heaters begin to contribute to your project’s efficiency while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is especially beneficial for construction projects with varying timelines and budgets, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing construction heaters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to explore how leasing can enhance your business’s tax position. Conclusion Choosing to lease construction heaters through CWB National Leasing is a strategic decision that equips your construction site with essential heating solutions while maintaining financial flexibility. It ensures access to high-quality heaters, vital for maintaining a safe and comfortable working environment, without the financial burden of a large upfront investment. This leasing approach enables enhanced site efficiency, worker comfort, and increased productivity, helping your construction projects to progress smoothly and efficiently.
Service
In Stock
Service
New
ISO
CWB National Leasing in Winnipeg
Elevate Your Business with Leased Servers from CWB National Leasing Are you ready to supercharge your business, enhance your operational efficiency, and boost your profits? Look no further than CWB National Leasing for all your server leasing needs. Here's why leasing servers with us is the ideal choice: Get Your Equipment Fast In today's fast-paced business landscape, swift access to cutting-edge technology is crucial for staying competitive. At CWB National Leasing, we recognize the urgency of acquiring your servers promptly. When you apply for a server lease with us, you can expect a lightning-fast decision-making process. Just how fast are we? Typically, within a mere 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your high-quality servers are delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By choosing leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your servers with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease servers with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your servers, they will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your server lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing servers through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing servers with confidence. In conclusion, leasing servers with CWB National Leasing is the strategic choice for business owners determined to enhance their efficiency, reduce costs, and increase profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your server leasing needs today!
Service
In Stock
Service
New
ISO
Design, Planning, and installation of DCS networks
Nulux Networks in Edmonton
Navigating Through the Intricacies of DCS Networks: Nulux's Unparalleled Expertise in Design, Planning, and Installation In the digitally dominated era where distributed control system (DCS) networks stand at the helm of operational efficiency and control, especially in the critical terrain of the oil and gas industry, Nulux Network Solutions etches its prowess in delivering bespoke, resilient, and high-performance network solutions. Your Strategic Partner in DCS Network Management With over two decades deep-diving into telecommunications and networking, Nulux has not just witnessed but actively shaped the evolution of industrial networks, especially when it comes to complex and crucial DCS network upgrades across the expanse of North America. Our hands-on experience spans from installing, maintaining, to strategic troubleshooting and upgrading multifaceted copper cabling systems, a testimony to our comprehensive mastery over the domain. At the heart of our operations reside resolute perfectionism and an unyielding commitment to optimal workmanship, which not only fills a significant industry void but also redefines the benchmark for telecom cabling providers. Your DCS Network, Crafted with Precision by Nulux Designing and Planning: Our seasoned team navigates through the complexity of your operational requirements, ensuring the DCS network is meticulously designed and planned, guaranteeing an unbroken chain of communication and control across your operational modules. Installation with Excellence: Employing our profound understanding of copper network potentials, our installation services assure you enjoy the robustness, reliability, and performance copper networks inherently bring – high-bandwidth transmission, easy termination, and dependable long-term functionality. An Expanse of Comprehensive Solutions: Nulux’s proficiency isn’t siloed into merely design and installation. Our offerings span from providing effective solutions for voice, data, video services, to crafting custom solutions that mirror your specific operational requisites. Moreover, we stand by you throughout your project’s lifecycle with unwavering technical support. Why Navigate the DCS Network Terrain with Nulux 1. Unwavering Quality: Nulux is synonymous with quality, backed by robust and high-performance networks that effortlessly manage operational data loads while ensuring cost-effectiveness and a remarkable degree of reliability and durability. 2. Tailored Solutions: Your operational needs are unique, and we honor that uniqueness by delivering customized DCS network solutions, ensuring that the system isn’t just installed but is an actual asset enhancing your operational efficiency and control. 3. A Partner, Not Just a Provider: Our understanding of networks transcends technical know-how, delving into recognizing what truly propels businesses towards competitiveness and operational excellence. 4. A Testament of Experience: Our past endeavors echo our expertise and commitment, having successfully executed numerous industrial projects, ensuring our clients' DCS networks are not mere communication channels but strategic assets propelling operational success. In the rugged and challenging operational landscapes of the oil and gas industry, let Nulux Network Solutions be your beacon, ensuring your DCS networks are not just infrastructural installations but strategic conduits amplifying your control, communication, and operational efficiency. Embark on a journey where your DCS networks become pivotal assets driving operational success and efficiency. Connect with Nulux Network Solutions today for an initial consultation and step into a future where your operations are seamlessly integrated, controlled, and perpetually propelled towards excellence.
Service
In Stock
Service
New
ISO
PipeDNA in Houston
Enhancing Tubular Inspection Management with PipeDNA: Streamlining Quality Assurance in the Oil and Gas Industry In the oil and gas industry, ensuring the quality and integrity of tubular products is of paramount importance. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to effectively manage and streamline tubular inspection processes, enabling enhanced quality assurance and compliance. Efficient Management of Inspection Jobs: PipeDNA provides a comprehensive solution for managing inspection jobs across multiple sites. Stakeholders can easily create and track inspection jobs, monitor their status, and manage inspection profiles within the platform. This streamlined approach eliminates manual and time-consuming processes, ensuring efficient coordination and effective allocation of inspection resources. Real-time Job Status and Reporting: With PipeDNA, stakeholders can access real-time updates on the status of inspection jobs. The platform enables instant communication and collaboration between inspectors, supervisors, and other relevant parties involved in the inspection process. By providing a centralized hub for reporting and documentation, PipeDNA enhances transparency and allows for swift decision-making based on accurate and up-to-date information. Tailored Inspection Profiles: PipeDNA allows stakeholders to create and manage inspection profiles specific to their tubular products. Customizable inspection profiles enable stakeholders to define the required tests, measurements, and criteria for each type of tubular product. By tailoring inspection profiles to their unique needs, stakeholders can ensure adherence to industry standards and regulatory requirements, ultimately guaranteeing the quality and safety of their tubular assets. Seamless Integration of Inspection Data: PipeDNA offers seamless integration of inspection data, eliminating the need for manual data entry and reducing the risk of human errors. The platform allows for the integration of manufacturing data, ensuring that inspection results are directly linked to the production process. By automating the transfer of data, PipeDNA enables stakeholders to maintain accurate and reliable records, enhancing traceability and facilitating data-driven decision-making. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Leveraging Emerging Technologies: PipeDNA leverages today's emerging technologies to optimize tubular inspection management. The platform supports barcoding and labeling systems, integrating popular barcode standards for efficient identification and tracking. PipeDNA is RFID ready, allowing for integration with RFID technologies such as labels and asset tags, further enhancing asset tracking and traceability. Additionally, PipeDNA supports IoT data integrations using the MQTT standard, enabling fast and reliable sensor data integration for enhanced inspection processes. PipeDNA revolutionizes tubular inspection management in the oil and gas industry, providing a smart cloud-based platform that streamlines quality assurance processes. By offering efficient management of inspection jobs, real-time status updates, tailored inspection profiles, seamless data integration, and enhanced identification and traceability, PipeDNA empowers stakeholders to ensure the highest level of quality and compliance in their tubular assets. Embrace PipeDNA and elevate your tubular inspection management to new levels of efficiency and reliability.
Service
Currently in Use
Service
New
API
Air Freight
ID OILTOOLS B.V. in Oudkarspel
Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more!
Buy
In Stock
Product
New
API
Sea Freight
Midastream Supply Company in Airdrie
The Drive Down Bailer is used to collect samples or remove debris from the wellbore. The Bailer is jarred into the sample or debris forcing material into the cylinder, which is retained by a ball or flapper type non-return seat. The bailer is then jarred upwards and retrieved. Applications • Recovery of in-fill samples from wellbore or sump • Removal of compacted debris or sand from flow control devices
Buy
Currently in Use
Distributor
New
API
Land Freight
Fixed Blade Stabilizer for Coiled Tubing
FBS Coiled Tubing ToolMarlin Oil Tools in Calgary
Introducing the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools: The Optimal Solution for Coiled Tubing Stability in Oil and Gas Well Interventions Marlin Oil Tools proudly presents the FBS (Fixed Blade Stabilizer), a cutting-edge downhole tool meticulously designed to enhance the stability and efficiency of well intervention operations. As part of the borehole assembly (BHA), the FBS plays a crucial role in centering the BHA relative to the well's axis, ensuring optimal performance during critical interventions, especially in wells with significant inclination or when coiled tubing (CT) exhibits residual bending. Here’s why the FBS is an indispensable tool for your operations. Key Features of the FBS (Fixed Blade Stabilizer): Precision Centering: Engineered to center the BHA within the well, the FBS ensures that tools like mills or perforators operate effectively at the heart of the wellbore, crucial for tasks requiring precise positioning such as milling or perforation. Versatile Application: Ideal for use in wells with various inclinations, up to 90 degrees, where the BHA tends to lie against the well wall, the FBS provides the necessary support to maintain the BHA in the optimal position. Enhanced Stability: By preventing the eccentric location of the CT BHA within the well, the FBS significantly reduces the risk of operational issues, ensuring smoother, more efficient well interventions. Robust Design: The fixed blades of the FBS are designed to withstand the harsh downhole conditions, offering durability and reliability throughout the operation. Elevate your well intervention strategies with the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum BHA stability and efficiency in oil and gas operations. The FBS excels in centering the BHA relative to the well's axis, ensuring accurate positioning for milling, perforation, and other precision-dependent tasks. With its ability to accommodate wells of up to 90 degrees inclination and correct CT BHA eccentricity, the FBS is your solution for enhancing operational effectiveness and reducing risks in challenging well conditions. Choose the FBS for unparalleled support and stability in your coiled tubing operations. Why Choose the FBS from Marlin Oil Tools? Optimized Well Intervention: Improves the accuracy and efficiency of milling and perforation tasks by centering the BHA. Adaptable to Various Well Inclinations: Provides consistent performance in wells with up to 90 degrees of inclination. Reliable Stability: Reduces operational complications by preventing the CT BHA from lying eccentrically in the well. Durable Construction: Built to endure the rigors of downhole environments, ensuring longevity and reliability. The FBS (Fixed Blade Stabilizer) by Marlin Oil Tools represents the forefront of downhole stabilization technology, ensuring that your well intervention operations are performed with the highest level of precision and efficiency. Incorporate the FBS into your coiled tubing operations to achieve optimal outcomes in well stability and intervention success.
Buy
Made to Order
Manufacturer
New
API
Land Freight
AMS Hydro in Vancouver
Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature
Buy
Made to Order
New
ANSI
Sea Freight
Home Country Tax Payments for Expats
Personal FX ServicesDunbridge Financial in Oakville
Stay Committed to Your Home Country with Dunbridge Financial's Personal Services: Simplify Tax Payments Life can take us to different corners of the world, but it's essential to stay connected to our home country and fulfill our commitments, especially when it comes to tax payments. At Dunbridge Financial, we understand the importance of keeping your home country obligations up to date, and that's why we offer Personal Services tailored to your specific needs, including hassle-free tax payments. Ensure Your Home Country Commitments with Ease Paying taxes to your home country while living abroad can be a daunting task. But with Dunbridge Financial, it's a breeze. Our streamlined services enable you to fulfill your tax responsibilities promptly and securely, no matter where you are in the world. Stay committed to your financial duties and gain peace of mind knowing that your tax payments are in safe hands. Experience Our Personal Services At Dunbridge Financial, we believe in providing services that make managing your personal finances simple and stress-free. Here's what sets us apart: 1. Live Rates with No Hidden Fees Transparency is the foundation of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and ensure that you're making the most out of your money. 2. Security is Our Priority The security of your funds and data is of utmost importance to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your finances are managed with the highest levels of safety and security. Enjoy peace of mind knowing that your financial transactions are protected. 3. Easy to Use, Easy to Save Managing your finances shouldn't be complicated. With Dunbridge Financial, it's as simple as can be. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your trusted partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for seamless and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Simplify Your Tax Payments Don't let tax payments be a source of stress. Join Dunbridge Financial today and experience a world of ease, convenience, and security when it comes to managing your personal finances. Whether you're making tax payments to your home country or sending money to loved ones abroad, we are here to make your financial journey a breeze. Simplify your tax payments with Dunbridge Financial. Sign up now and embrace a worry-free, well-connected financial experience.
Service
Made to Order
Service
New
ISO
Air Freight
Discover the Convenience of Safe-T-Whip Equipment Rental: Your Hassle-Free Solution At Safe-T-Whip & Restraints Inc., we understand the ever-changing needs of your oilfield projects. That's why we are thrilled to offer our top-of-the-line Safe-T-Whip restraints on rental, providing you with a maintenance-free, certified, and budget-friendly solution. Maintenance-Free Peace of Mind: Say goodbye to the hassles of maintenance and inspections. With Safe-T-Whip equipment rental, you'll receive a full line of pre-inspected and certified restraints, ready to tackle the challenges of your projects. Focus on your core operations, while we take care of the safety aspect for you. Try Before You Commit: Not sure if the Safe-T-Whip system is right for your project? Our equipment rental option is perfect for trying out the system before making a long-term commitment. Discover the benefits and efficiency of our restraints firsthand. Flexibility for Short-Term Projects: Short-term projects demand flexibility, and we've got you covered. Our rental service caters to projects of any duration, allowing you to equip your site with top-notch safety restraints for the required timeframe, without long-term commitments. Certified Installation or In-House Training: As part of our turn-key project services, our team of certified installers can assemble the entire Safe-T-Whip system for you, ensuring everything is in place for optimal safety. Alternatively, we offer comprehensive training to one of your own team members through our Safe-T-Whip certification process, empowering them to assemble or disassemble the system on demand. Nationwide Availability: Easy access to our safety solutions is our top priority for you. Safe-T-Whip equipment rental is available throughout Canada, either directly from Safe-T-Whip & Restraints Inc. or through our approved and certified suppliers. No matter where your project is located, we've got you covered. Tailored Solutions for Your Needs: Every project is unique, and so are our rental plans. Let us know your project requirements, and we'll work closely with you to provide the best-suited solution, ensuring the fastest and easiest way to secure the required number of restraint lengths, no matter the project's size. Safety Simplified: Safe-T-Whip equipment rental offers a simplified approach to safety, empowering you to focus on your operations with the confidence that your workforce is protected by the industry's best restraint system. Contact us today and explore the world of convenience and safety with Safe-T-Whip & Restraints Inc. Let us take care of your safety needs while you focus on what you do best - running a successful oilfield operation.
Rental
Made to Order
Service
New
API
Air Freight
Plug with Equalizing Prong and Valve Sub-Assembly
Downhole ToolsHoca Oil Tools in Zwartemeer
HOCA Oil Tools: Revolutionizing Downhole Operations with Plug with Equalizing Prong and Valve Sub-Assembly In the dynamic and demanding world of downhole operations within the oil and gas industry, the quest for innovation, efficiency, and safety is relentless. HOCA Oil Tools, a leading provider of specialized downhole slick line tools, meets this challenge head-on with our advanced Plug with Equalizing Prong and Valve Sub-Assembly. This tool is meticulously designed to enhance the functionality and safety of downhole operations, providing a solution that is both versatile and reliable. HOCA’s Plug with Equalizing Prong and Valve Sub-Assembly: Tailored for Optimal Performance Our Plug with Equalizing Prong and Valve Sub-Assembly is engineered for precision and durability, designed to address the complex needs of modern downhole activities. This innovative tool combines the functionality of a plug for secure sealing and isolation with the added advantage of an equalizing prong and valve mechanism. This integration allows for controlled pressure equalization, crucial in preventing potential downhole complications and ensuring the safety of the well and personnel. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Plug with Equalizing Prong and Valve Sub-Assembly means opting for a product that stands at the confluence of innovation, quality, and safety. We are committed to providing solutions that not only meet the current demands of the oil and gas industry but also anticipate future challenges, ensuring our clients are equipped for success. Integrating our advanced plug assembly into your downhole operations signifies a move towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your operational goals with cutting-edge solutions and comprehensive service. Select HOCA Oil Tools for your downhole needs and leverage the advantages of our Plug with Equalizing Prong and Valve Sub-Assembly to optimize your operational outcomes. Partner with us and step into a new era of downhole operations, where efficiency, safety, and performance are paramount. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards and drive your success in the competitive oil and gas landscape.
Buy
In Stock
Product & Service
New
API
Air Freight
ALCiT in Mississauga
Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.
Service
Made to Order
Service
New
ISO
Digital
Marlin Oil Tools in Calgary
Introducing the XOV Crossover Tool from Marlin Oil Tools: Your Solution for Seamless Downhole Connections Marlin Oil Tools is proud to offer the XOV Crossover Tool, a versatile downhole tool designed to facilitate the connection of two tools or pipes with differing threads, ensuring seamless integration within your Bottom Hole Assembly (BHA) during oil and gas operations. Engineered for adaptability, the XOV Crossover Tool is available in a wide range of designs, types, and sizes of threads to meet the diverse needs of the industry. Key Features of the XOV Crossover Tool: Versatile Thread Compatibility: Designed to connect components with different thread patterns, enhancing operational flexibility and efficiency. Customizable Design Options: Available in various designs and specifications, including multiple outer diameters and inner bore sizes, to perfectly match your operational requirements. Precision Engineering: Features precise thread codes for both internal (Box) and external (Pin) threads, ensuring reliable and secure connections. Rapid Customization Capability: Offers quick turnaround on customized tool designs upon client request, minimizing downtime and accelerating project timelines. Durable Construction: Built to withstand the harsh conditions of downhole environments, ensuring reliability and longevity of your tool assembly. Easy Integration: Seamlessly integrates into existing BHA configurations, providing a straightforward solution to connectivity challenges in the field. Maximize your downhole operational efficiency with the XOV Crossover Tool from Marlin Oil Tools, a leading solution for connecting downhole tools and pipes with varying thread types in the oil and gas industry. This highly adaptable crossover tool is engineered to offer precision, durability, and versatility, featuring customizable options for thread sizes, diameters, and designs to meet the specific needs of your operations. With its capability for rapid customization and reliable performance, the XOV Crossover Tool is the ideal choice for ensuring seamless connections and enhancing the integrity of your downhole tool assemblies. Choose Marlin Oil Tools for your crossover needs and experience the difference in quality and service. Why Choose the XOV Crossover Tool from Marlin Oil Tools? Operational Versatility: Ensures compatibility across a broad spectrum of downhole tools and pipe threads. Customization to Fit: Tailors to your specific operational needs with customizable designs and precise threading. Quick Response Time: Provides fast turnaround on custom requests, keeping your projects on schedule. Enhanced Connectivity: Guarantees secure and reliable connections, reducing the risk of operational issues. The XOV Crossover Tool by Marlin Oil Tools represents the cutting edge in downhole connectivity solutions, offering unparalleled adaptability, precision, and reliability for your oil and gas operations. Incorporate the XOV Crossover Tool into your tool assembly to achieve optimal performance and operational success.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Tracked-hoe Excavator of various sizes and brands available to fit your needs
Hydraulic ExcavatorGrid Dirt Construction in Red Deer
Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction
Buy
Currently in Use
Product
New
DNV
Sea Freight
MS-201EC Extraction Condensing Steam Turbine
Multistage TurbineKessels Engineering Works Pvt. Ltd. in New Delhi
Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Premier Removable Production Packer
Premier PackerMidastream Supply Company in Airdrie
The Premier™ packer is a hydraulic-set, large-bore, removable production packer. It combines the performance of a permanent packer with the conveniences of a retrievable packer. The Premier is ideally suited for big-bore completions and multizone stacked-packer completions. Its retrieving options offer new alternatives in high intervention cost applications. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
Drone Powered Visual Inspections
Software DevelopmentEleks in Toronto
ELEKS: Empowering Energy Excellence through Automated Drone-Powered Inspections In the dynamic world of energy, innovation is the driving force behind success. ELEKS stands at the forefront of this innovation, leveraging our unparalleled energy sector technology expertise to revolutionize the way you manage your assets, commercial buildings, and industrial facilities. Imagine a future where automated drone-powered inspections redefine efficiency, dramatically reducing costs, assessment time, and workplace hazards, all while making a significant contribution to lowering carbon emissions. Our approach integrates cutting-edge technology with precision, creating custom solutions that redefine the limits of what's possible. Here's how ELEKS can be your partner in achieving operational excellence. 1. Efficient Inspections, Reduced Costs: With automated drone-powered inspections, the cost-efficiency of your operations skyrockets. Manual inspections involve substantial expenses, but our technology-driven approach slashes costs while enhancing accuracy. 2. Swift Assessment: Time is of the essence in the energy sector. Our solutions redefine assessment timelines, making inspections at least ten times faster than traditional human-based methods. 3. Workplace Safety Revolution: Workplace hazards are a critical concern. By utilizing automated drones, you eliminate the risks associated with manual inspections, creating a safer work environment for your teams. 4. Carbon Emission Reduction: In an era focused on sustainability, carbon emissions reduction is a priority. Our automated inspections not only streamline operations but also contribute to lowering carbon emissions, showcasing your commitment to a greener future. 5. High-Precision Imagery: Augmented with high-precision cameras, our fully automated aerial vehicles (UAVs) capture high-resolution images with sub-millimeter accuracy. This level of precision empowers you with detailed insights for informed decision-making. 6. Versatile Operational Environment: Our automated drones operate effectively even in GPS-denied environments. This adaptability ensures that you can collect valuable data, regardless of the setting. 7. Data-Powered AI and ML: The data collected from automated inspections becomes a goldmine for AI and machine learning solutions. Our technology empowers you to leverage insights, enhancing risk management and operational efficiency. ELEKS: Transforming Energy Operations ELEKS doesn't just offer services – we offer transformation. Our energy sector technology expertise isn't just about solutions; it's about redefining industry standards. The convergence of cutting-edge technology, precision, and sustainability underpins our approach. Join us in reshaping the future of energy operations, where innovation meets efficiency, safety is paramount, and sustainability is more than a buzzword. With ELEKS by your side, you're not just embracing technology – you're embracing a journey towards operational excellence. Step into a world where automated drone-powered inspections become the cornerstone of efficient, safe, and sustainable energy management.
Service
Made to Order
Service
New
ISO
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Sign in to add favorite